Gilderflukeco BR-SmartMedia Manuel d'utilisateur télécharger pdf (Page 33)

Echo Commands:

“a”(card address) Echo On:

“b” Echo Off:

The ‘Echo ON’ command will turn on a special mode that will

cause all of the other serial port commands to echo on the se-

lected card. This used when you are setting up serial commands

so you can verify all the commands you are issuing are being re-

ceived correctly. If the card is operating in MultiShow mode, the

sequencer number (‘A’ through ‘H’) will be included in most of the

echo responses. If you are in any other mode, the sequencer

number will be omitted. In the following examples, the ‘echo’ re-

sponses are shown in

bold italics

If you send “a00”, the echo mode will be turned ON:

card 00h/__0, echo mode on

If you send “*03” to request a specific show on all cards:

card 00h/__0, Sequencer A, requested show 03h/__3 ShoName3

If you send “t00” to start the requested show playing on a specific

card:

card 00h/__0, Sequencer A, starting show 03h/__3 ShoName3

If you send “!00” to start a show looping on a specific card:

card 00h/__0, Sequencer A, looping show 04h/__4 ShoName4

If you send “u” to stop all shows playing on all cards:

card 00h/__0, Sequencer A, stopped show 05h/__5 ShoName5

If you send “u” to stop a card that is already stopped, it will give

you an error message:

card 00h/__0, Sequencer A, not playing or looping __8 ShoName8

Similar error messages will be returned whenever you ask the

card to do something that it can not do at the current time.

The ‘Echo OFF’ command turn off the echo mode on all the

cards in the system.

“j5AA5” (card address) Card Reset:

This command will erase the AutoDownload file on the

SmartMedia Flash Card on the BR-SmartMedia. Needless to say,

this command is only rarely used in a completed installation.

GILDERFLUKE & CO .• 205 SOUTH FLOWER STREET • BURBANK , CALIFORNIA 91502 • 818/840-9484 • 800/776-5972 • FAX 818/840-9485

AST COAST /FLORIDA OFFICE • 7041 GRAND NATIONAL DRIVE • SUITE 128d • ORLANDO , FL. 32819 • 407/354-5954 • FAX 407/354-5955

25 of 81

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 88 89

Pas de commentaire

Gilderflukeco BR-SmartMedia Manuel d'utilisateur Page 33